ARRI ARRIFLEX 235 - Manual (Page 56)

56 56
Overview of Display Modes
Mode 1 is displayed:
after switching on the camera,
after depressing the “RUN”-button or
30 seconds after the last operation.
1st Display Line 2nd Display Line Adjustment Possibility
Mode 1 total exposed film counter (m/ft) or frame rate (fps) or selection of a standard frame rate
take counter (m/ft) ESU in standby and configuration of the 1st display line
frame rate (fps) while running
(external control connected)
Mode 2
programmed frame rate (PS) programmed frame rate (fps) programmed frame rate
ESU – external control connected (forwards / reverse)
Mode 3 total exposed film counter (m/ft) or power supply voltage (V) configuration of the film counter
take-counter (m/ft) unit of measurement (m/ft)
Mode 4 volume of the acoustic warning signal brightness of the keypad warning signal on / off
volume
keypad intensity control
Mode 5
run up speed selection of run up speed low/high
Camera Operation