ARRI ARRIFLEX 235 - Manual (Page 95)

95 95
10.4 Inserter Facilities
In addition to the usual video assist functions, the IVS
offers a variety of inserter facilities. There are two
different groups of information:
• Format markings
Format markings, which are inserted electronically, are
often more visible than format markings on the ground
glass.
• Man readable information
Camera status
System line
Additional text
All inserted data are only available at the outputs
Video with data.
All engravings from the ground glass (e. g. TV-
Safe etc.) are visible at all times at all outputs.
Note: All currently used settings are stored even if the
IVS or the camera is switched off or disconnected
from the power supply. After restarting the IVS
the settings are unchanged, except for the image
stored mode, which will always come up in live
mode.
10.4.1 Setting the On-Screen Displays
During programming the inserted data are not
fully updated (e. g. Frame Counter Information).
To get information updated, leave the on-screen
display menu by pressing the Enter/Insert key
Ñ for more than three seconds.
Once the on-screen display is activated by pressing the
Enter/Insert key Ñ for more than three seconds, the
following procedure is used to select and set all functions
within the main menu and the sub menus:
• Pressing the key Ê or Ë will move the cursor > up or
down. Pressing the key Í or Ì activates sub menus.
Video-Assist-System