ARRI ARRIFLEX 235 - Manual (Page 15)

15 15
4. Installation of the Camera
4.1 Packing and Transport
In order to prevent damage to the mirror
shutter, a protective cap must be on the lens
mount receptacle at all times.
When transporting the camera, pay attention
that the movement is in the locked position
➪
photo .
If the ARRIFLEX 235 is transported or stored
without a magazine, the magazine opening
cover ➪
photo should be attached.
Loaded or empty magazines should only be
transported or stored with the loop protector
➪
photo attached to avoid damage to the film
stock and the magazine throat assembly.
4.2 Tripod Heads
The following tripod heads are suitable for use with the
ARRIFLEX 235:
• ARRIHEAD
• ARRIHEAD 2
• ARRIHEAD 2 with integrated encoders
• ARRI Fluid-Heads
• Sachtler Studio 7, 150 H
• Mitchell-Head
• Moy-Head
• Ronford F7
• Hot-Head
• Cam-Remote-Head
• Worall-Head
In applications where the camera mount is subject
to high forces (e.g. helicopter mounts) the camera
must be additionally secured with retaining cords.
All fastening screws must be tightened firmly
with an appropriate screwdriver (not with the
commonly used coin!).
Installation