ARRI ARRIFLEX 235 - Manual (Page 77)

77 77
• To switch between normal video and video with data,
use the on-screen program mode. Enter the main menu
by pressing the Enter/Insert key Ñ for more than 3
seconds. Go to sub menu VIDEO/TEXT ADJUST. The
menu point Y/C DATA, which can only be reached if
BNC OUT is on Y/C, switches between normal video
and video with data on the Y/C signal. The line
displays Y/C DATA ON or OFF.
See chapter 10.4 Inserter Facilities for information on
the on-screen program mode.
In the normal video output almost no electronic information
is inserted. Only a rolling bar at the lower left corner of
the video image indicates a running film camera.
In the video with data output, additional data such as
format marks or camera status information can be inserted.
The É/Y socket is standard BNC for 75 Ω video outputs
➪
photo .
Video-Assist-System