IDEC High Performance Series - Manual (Page 1114)

3 Uploading
24-22 WindO/I-NV2 User’s Manual
Project data in the MICRO/I or in an external memory inserted in a computer can be read using WindO/I-NV2 and
saved to the computer.
3.1 Upload Project Data from the MICRO/I
1 Change communication settings according to the connection method between the computer and the MICRO/I.
In the Communication Settings dialog box, select MICRO/I from Communicate with. To communicate with the
MICRO/I as an O/I Link Slave via an O/I Link Master, select O/I Link Slave. For details, refer to “1.3 Change
Communication Settings” on page 24-6.
2 On the Home tab, in the Project group, click the Upload icon.
• When Communicate with is set to MICRO/I and Port is set to USB or Serial, the Upload dialog box is
displayed.
• When Communicate with is set to MICRO/I and Port is set to Ethernet, the Target IP Address dialog box is
displayed. Specify the IP address of the MICRO/I, and then click OK to start the upload. For details, refer to “To
execute any function except project data download” on page 24-9.
• When Communicate with is set to O/I Link Slave, the Target Slave dialog box is displayed. Specify the slave
station of the MICRO/I to communicate with, and then click OK to display the Upload dialog box.
If Port is set to Ethernet, specify the IP address of the master via which to upload. If Port is Ethernet and the
via Web Server Unit check box is selected, specify the port number of the Web Server Unit connected to the
destination MICRO/I. For details, refer to “To execute any function except project data download” on page 24-11.
3 Uploading
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
While editing project data, project data can be uploaded from the MICRO/I even by clicking the Upload
icon in the Transfer group on the Online tab.
If project data is being edited, project data will be closed. If the project data was changed, a confirmation
message to save the project data is displayed.
• Click Yes to save the project data and display a dialog box corresponding to the communication settings.
• Click No to close the project data without saving changes and display a dialog box corresponding to the
communication settings.
• Click Cancel to stop uploading and return to the editing screen without saving the project data.
If security is enabled in the MICRO/I project, the Password Screen is displayed. Enter the password.
For details, refer to Chapter 23 “User Accounts and the Security Function” on page 23-1.