IDEC High Performance Series - Manual (Page 233)

WindO/I-NV2 User’s Manual 4-47
3 Project Settings Dialog Box
4
Project Set
tings
3.4 Host I/F Network Tab
The Host I/F Network tab is used to configure the information for hosts connected by Ethernet communication.
This tab is displayed when a host I/F driver is selected that supports Ethernet communication.
■ Settings
Edits the settings for the devices.
■ Edit
Configures the IP address and port number for the selected station number. Select a station number and click this
button to display the Host I/F Network Settings dialog box.
■ Clear
Returns the settings for the selected station number to the defaults.
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
Station No.: Shows the station number of host. Double clicking the cell displays the Host I/F Network Settings
dialog box.
IP Address: Shows the IP address of the host. (Default: 192.168.0.1)
Double clicking the cell allows you to specify the host's IP address.
The format is “xxx.xxx.xxx.xxx”. “xxx” stands for a numeric value from 0 to 255.
When connecting multiple devices to the same network, make sure to assign each device a unique IP
address.
Port No.: Shows the port number of host. (Default: 2101)
Double clicking the cell allows you to specify the host's port number (0 to 65535).
You can change the IP address of the station numbers for the hosts using the System menu. In the System
menu, press Initial Setting, Com. I/F, Host I/F Network in order.