Er to chapter 30 – IDEC High Performance Series User Manual
Page 1254
1 Memory Cards
30-10
WindO/I-NV2 User’s Manual
●
Using WindO/I-NV2 to read and write to a memory card inserted in the computer
This procedure shows how to read and write from a memory card inserted in the computer's memory card slot.
If the computer does not have a memory card slot, use an external memory card reader/writer or similar device.
Communication settings
To read and write to the memory card inserted in the computer, the memory card must be specified as the
communication device. Configure the communication settings as follows before downloading or uploading.
1
On the Home tab, in the Project group, click Comm. Setup.
The Communication Settings dialog box appears.
2
Under Communicate with, select Memory Card, then click OK.
Downloading
This procedure shows how to download the project data to the Memory Card Folder on the memory card.
1
Open the project data to download using WindO/I-NV2.
2
On the Home tab, in the Project group, click the icon above Download.
The Download dialog box appears.
Computer
Through an external
memory card reader/writer
Insert memory card into slot of PC.
SD Memory Card
CF Card
SD Memory Card
CF Card