IDEC High Performance Series - Manual (Page 756)

3 Goto Screen Command
12-20 WindO/I-NV2 User’s Manual
3.3 Properties of Goto Screen Command Dialog Box
This section describes items and buttons in the Properties dialog box.
●
General Tab
■ Part Name
Enter a name for the part. The maximum number is 20 characters.
■ Action Mode
Select the action to perform when the trigger condition is met from the following:
Back to previous Screen: Switches to the previous screen. Returns to up to 16 earlier screens.
Switch to Base Screen: Switches between Base Screen.
Open Popup Screen: Opens a Popup Screen.
Close Popup Screen: Closes a Popup Screen.
Open Device Monitor Screen: Opens the Device Monitor Screen.
Close Device Monitor Screen: Closes the Device Monitor Screen.
Open Password Screen: Opens the Password Screen.
Close Password Screen: Closes the Password Screen.
Open Adjust contrast Screen: Opens the Adjust contrast Screen.
Close Adjust contrast Screen: Closes the Adjust contrast Screen.
Open File Screen for movie files: Opens the File Screen.
Close File Screen for movie files: Closes the File Screen.
Switch to System Menu Screen: Switches to the System Menu Screen.
Reset current screen: Resets the current Base Screen.
When the current Base Screen is reset using the Reset current screen function, the window and internal
devices restart as if the Base Screens were switched.