IDEC High Performance Series - Manual (Page 321)

WindO/I-NV2 User’s Manual 7-27
3 Text
7
Dr
awings
3.2 Properties of Text dialog box
This section describes items and buttons in the Properties dialog box.
■ Font
Selects the font to use to display text from the following.
Japanese, European, Chinese, Taiwanese, Korean, Central European, Baltic, Cyrillic, Windows, Stroke
This option can only be configured if the Use Text Manager check box is cleared.
■ Style
Selects the style of text from the following.
Regular, Bold, Shadow
This option can only be configured when Japanese, European, Chinese, Taiwanese, Korean, Central
European, Baltic, or Cyrillic is selected for Font.
■ Align Text Vertical
Selects text alignment in the vertical direction.
Top, Center, Bottom
Top when the Vertical Writing check box is selected.
For details, refer to Appendix “5 Text Alignment” on page A-5.
■ Align Text Horizontal
Selects text alignment in the horizontal direction.
Left, Center, Right, Center-Left
For details, refer to Appendix “5 Text Alignment” on page A-5.
■ Vertical Writing
Select this check box to display text vertically.
This option can only be configured when Japanese, European, Chinese, Taiwanese, Korean, Central
European, Baltic, or Cyrillic is selected for Font.
When the Vertical Writing check box is selected, take care about the following points. This is applicable
for installations of Windows that support East Asian characters.
• When there is a mixture of double-byte and single-byte characters, the half-width characters are left-
aligned.
• Dashes are displayed horizontally. Symbols representing voiced and semi-voiced sounds of single-byte
characters are shown as follows.
Aligned to
leŌ edge
Horizontal
display
Next
characters