IDEC High Performance Series - Manual (Page 97)

WindO/I-NV2 User’s Manual 2-67
5 WindO/I-NV2 Common Operations and Settings
2
WindO/I
-NV2 F
eatures & B
asic Oper
ations
This section describes common settings when creating project data.
5.1 Device Address Settings
Device addresses are memory on the MICRO/I and connected devices (host devices) that can store values in bit or
word units.
By setting device addresses to parts and functions, you can control the screen display and operation of parts.
Device addresses are specified by combining the device type and address in the following formats.
The device address can be directly entered or it can be set with the Device Address Settings dialog box.
●
Direct entry
Enter a device address with the keyboard following the basic format.
To enter the bit (0 to 15) for a word device, enter the address, the bit separator “.” or “-”, and the bit. You can enter
the address with either separator, but it is displayed according to the Bit Number Symbol setting. Bit Number
Symbol is set on the Edit tab of the WindO/I-NV2 Options dialog box.
●
Specifying a device address with the Device Address Settings dialog box
To display the Device Address Settings dialog box, click to the right of the text box for setting the device address.
Use this dialog box to set the device address.
■ Target
Select the device that includes the device address to set from Internal or Host.
■ Station No
Specify the station number for the connected device (host device). The range that can be specified differs according
to the host I/F driver selected.
This option can only be set when 1:N Communication is selected on the Connection of the Select Host I/F Driver
dialog box or the Change Host I/F Driver dialog box.
■ Device Type
Select the device type.
The list only shows device types that can be used.
■ Address
Specify the address. The range that can be set differs according to the device type selected.
■ Bit
Specify the bit (0 to 15) of the word device when a word device is selected in Device.
■ Tag Name
Shows the tag names configured for the selected device address.
■ Comment
Shows the comments configured for the selected device address.
5 WindO/I-NV2 Common Operations and Settings
Bit Device type Address . Dot (WindLDR Format):
Bit Device type Address - Dash (WindO/I-NV2 Format):
Address and bit separator