IDEC High Performance Series - Manual (Page 208)

1 Creating and Manipulating WindO/I-NV2 Project Data
4-22 WindO/I-NV2 User’s Manual
5 Select the conversion option, and then click OK.
The data conversion process begins.
6 When the data is finished being converted, click Close.
●
Changing Host I/F Drivers
This section describes how to change the host I/F driver set in the project data being edited.
1 Click Change Host I/F Driver on the status bar.
The Change Host I/F Driver dialog box is displayed.
2 Select Manufacturer, Protocol, and Connection, and then click OK.
The confirmation message is displayed.
• Color settings (color data) are not converted.
• If the Popup Screen size is larger than the Base Screen size after the O/I type is changed, the Popup
Screen size is changed to the same size as the Base Screen.
• You cannot change the O/I type from HG2G-S/-5S/-5F, HG3G/4G to HG1F/2F/2S/3F/4F.