2 monitoring on the micro/i, 1 how the monitoring function is used, Monitoring on the micro/i -18 – IDEC High Performance Series User Manual
Page 1144: How the monitoring function is used -18, 2monitoring on the micro/i, Data del select, Windo/i-nv2 user's manual, Device monitor
Advertising
2 Monitoring on the MICRO/I
25-18
WindO/I-NV2 User's Manual
It is possible to change values of devices and check the operation on the MICRO/I.
2.1 How the Monitoring Function is Used
Monitoring in the MICRO/I can perform the following functions.
• Checking and changing the value of specified device
2
Monitoring on the MICRO/I
HG3G
HG2G-5F
HG2G-5S
HG2G-S
HG4G HG1F HG2F HG2S HG3F HG4F
MICRO/I
130
Device Monitor
LDR1
LM0
Device
LM
LDR
Data
Del
Select
0
00000
0
1
Device Monitor
Up
Down
Dec/Hex
Device
LM
LDR
Data
Del
Select
0
00000
0
1
Device Monitor
Up
Down
Dec/Hex
Device Monitor can be used in simulation mode. Values of external devices can be checked and changed
with the MICRO/I alone.
Advertising
This manual is related to the following products: