IDEC High Performance Series - Manual (Page 908)

3 Data Storage Area Management Dialog Box
16-6 WindO/I-NV2 User’s Manual
3.2 HG1F/2F/2S/3F/4F
■ Number of Stored Data for Alarm Log
Specifies the amount of Alarm Log data to save in the data storage area (0 to 1024).
Alarm Log data is only saved in the data storage area when Store is selected under Block Settings, Data in the
Auto-Setup dialog box or in the Individual Settings dialog box for Alarm Log Settings.
■ Number of HG Keep Register (LKR)
Specifies the number of HG keep register (LKR) addresses (1024 to 8192).
■ Number of HG Keep Relay (LK)
Specifies the number of HG keep relay (LK) addresses (1024 to 8192).
■ Free Space/Number of Stored Data for Data Log per Device
The displayed item changes according to the setting in Data Log Settings.
■ Default
Returns the configured values to their default values.
Free Space: Shows the amount of free space in the data storage area (in bytes).
This item is only displayed when the Log to Data Storage Area check
box is cleared in the Data Log Settings dialog box.
Number of Stored Data for Data Log per Device: Specifies the amount of Data Log data per device to save in the data
storage area (0 to 2048).
This item is only displayed when the Log to Data Storage Area check
box is selected in the Data Log Settings dialog box.