IDEC High Performance Series - Manual (Page 951)

WindO/I-NV2 User’s Manual 19-3
2 Text Groups and Text Configuration Procedure
19
Te
xt G
ro
up
This section describes the configuration procedure for text groups and text.
2.1 Creating Text Groups
1 On the Configuration tab, in the System Setup group, click Text Group.
The Text Group Settings dialog box is displayed.
2 In Number of Text Groups, specify the number of text groups to create (1 to 16).
The configured number of text groups are enabled.
3 Under Text Group Name, enter the name for each text group.
The maximum number for the Text Group name is 20 characters.
For one text group, proceed to step 7 .
2 Text Groups and Text Configuration Procedure
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F