IDEC High Performance Series - Manual (Page 569)

WindO/I-NV2 User’s Manual 10-57
4 Video Display
10
Data Displa
ys
4.2 Video Display Configuration Procedure
This section describes the configuration procedure for the Video Display.
1 On the Home tab, in the Parts group, click Data Display, and then click Video Display.
2 Click a point on the edit screen where you wish to place the Video Display.
3 Double-click the dropped Video Display and a Properties dialog box will be displayed.
4 Change the settings on each tab as necessary.
The Options tab only appears in Advanced Mode.
To switch to Advanced Mode, click Advanced.