Brother HLL9410CDN Enterprise Color Laser Printer User Manual
Page 223
Error Message
Cause
Action
Size Error 2-sided
The paper size specified in the
machine's paper size setting is not
available for automatic 2-sided
printing.
Press
(if required).
Load the correct size of paper in the tray and
set the tray for that paper size.
Choose a paper size supported by 2-sided
printing.
Paper sizes available for automatic 2-sided
printing are A4, Letter, Legal, Mexico Legal,
India Legal and Folio.
The paper in the tray is not the
correct size and is not available
for automatic 2-sided printing.
Size Mismatch
The paper in the tray is not the
correct size.
Load the correct size of paper in the tray
indicated on the LCD and set the size of paper
for the tray. Press
Retry
.
Storage device not
recognized
The USB flash drive is unavailable
for use.
Press
Close
, and then press and hold
to
turn off the machine. Wait a few minutes, and
then turn it on again. If the error message
remains, change the Job Save Location
setting to the machine's memory.
See
Related Information
:
Secure Print Using a
USB Flash DriveReplace the Toner Cartridge
.
Storage Full
The USB flash memory drive you
are using does not have enough
free space to store secure print
data.
Press
and delete the previously stored
secure print data.
Supplies
Belt End Soon
The belt unit is near the end of its
life.
Order a new belt unit before the LCD displays
Replace Belt
.
Supplies
Drum End Soon
The drum unit is near the end of
its life.
Order a new drum unit before the LCD
displays
Replace Drum
.
Supplies
Replace Belt
It is time to replace the belt unit.
Replace the belt unit with a new one.
Supplies
Replace Drum
It is time to replace the drum unit.
Replace the drum unit with a new one.
See
Related Information
:
Replace the Drum
Unit.
Supplies
Toner Low:
X
(X indicates the toner cartridge
or drum unit color that is near
the end of its life. BK=Black,
C=Cyan, M=Magenta,
Y=Yellow.)
If the LCD displays this message,
you can still print. The toner
cartridge is near the end of its life.
Order a new toner cartridge before the LCD
displays
Replace Toner
.
Supplies
WT Box End
The waste toner box is at the end
of its life.
Replace the waste toner box.
See
Related Information
:
Replace the Waste
Toner Box
.
Supplies
WT Box End Soon
The waste toner box is almost full. Order a new waste toner box before the LCD
displays
Replace WT Box
.
Toner Error
One or more toner cartridges are
not installed or not installed
correctly.
Pull out the drum unit. Remove all the toner
cartridges, and then put them back into the
drum unit.
Too Many Trays
The number of installed Optional
Trays exceeds the maximum
number.
Reduce the number of Optional Trays.
Tray 2 Error
Tray 3 Error
The optional lower tray is not
installed correctly.
Reinstall the lower tray.
218