Brother HLL9410CDN Enterprise Color Laser Printer - Manual (Page 83)

Home > Network > Wireless Network Settings > Use the Wireless Network > Configure Your Machine for a
Wireless Network Using the One Push Method of Wi-Fi Protected Setup ™ (WPS)
Configure Your Machine for a Wireless Network Using the One Push
Method of Wi-Fi Protected Setup
™
(WPS)
NOTE
For certain models, the wireless network connection can be used only when the optional Wireless Module is
installed.
If your wireless access point/router supports WPS (PBC: Push Button Configuration), you can use WPS from
your machine's control panel menu to configure your wireless network settings.
1. Press [Settings] > [All Settings] > [Network] > [WLAN(Wi-Fi)] > [WPS/Push Button] .
2. When [Enable WLAN?] appears, press [Yes] .
This will start the wireless setup wizard. To cancel, press [No] .
3. When the touchscreen displays [Start WPS on your wireless access point/router, then
press [OK].] , press the WPS button on your wireless access point/router. Then press [OK] on your
machine. Your machine will automatically detect your wireless access point/router and try to connect to your
wireless network.
If your wireless device is connected successfully, the machine's LCD displays [Connected] . Press [OK] .
You have completed the wireless network setup. To install the drivers and software necessary to use your
machine, go to your model's
Downloads page at support.brother.com .
Related Information
• Use the Wireless Network
Related Topics:
• Wireless LAN Report Error Codes
78