Wireless lan report error codes – Brother HLL9410CDN Enterprise Color Laser Printer User Manual

Page 97

Advertising
background image

Home >

Network

>

Wireless Network Settings

>

Print the WLAN Report

> Wireless LAN Report Error

Codes

Wireless LAN Report Error Codes

NOTE

For certain models, the wireless network connection can be used only when the optional Wireless Module is
installed.

If the Wireless LAN Report shows that the connection failed, check the error code on the printed report and see
the corresponding instructions in the table:

Error Code

Problem and Recommended Solutions

TS-01

The WLAN (Wi-Fi) is not enabled.
Check the following points and try to set up your wireless connection again:

Enable the WLAN setting on your machine.

If a network cable is connected to your machine, disconnect it.

TS-02

The wireless router/access point cannot be detected.
Check the following points and try to set up your wireless connection again:

Make sure the wireless router/access point is on.

Temporarily place your machine closer to the wireless router/access point when you are
configuring the wireless settings.

If your wireless router/access point is using MAC address filtering, confirm that the MAC
address of the machine is allowed in the filter. You can find the MAC address by printing the
Network Configuration Report.

If you manually entered the Network Name (SSID) and security information (authentication
method/encryption method), the information may be incorrect. Check the Network Name and
security information again and re-enter the correct information.

Restart your wireless router/access point. If you cannot find the Network Name (SSID) and
security information, see the documentation provided with your wireless router/access point,
or contact the router manufacturer, your system administrator, or Internet service provider.

TS-03

The wireless enterprise network and security settings you entered may be incorrect.
Check the following points and try to set up your wireless connection again:

Verify the following information:
-

Network Name (SSID) you selected to configure your machine.

-

Security information you selected to configure your machine (such as the authentication
method, encryption method, or User ID).

If you still cannot find the Network Name (SSID) and security information, see the
documentation provided with your wireless router/access point, or contact the router
manufacturer, your system administrator, or Internet service provider.

92

Advertising