Replace the drum unit, Caution – Brother HLL9410CDN Enterprise Color Laser Printer User Manual
Page 271
>
> Replace the Drum Unit
Replace the Drum Unit
Before starting the replacement procedure, see
Related Information
:
Replace Supplies
.
1. Make sure the machine is turned on.
2. Press the front cover release button and open the front cover.
3. Hold the drum unit's green labeled handle. Pull the drum unit out of the machine until it stops.
CAUTION
We recommend placing the toner cartridges and the drum unit assembly on a clean, flat surface with
disposable paper underneath it in case you accidentally spill or scatter toner.
4. Holding the green labeled handles of the drum unit, lift the front of the drum unit and remove it from the
machine.
IMPORTANT
Hold the handles of the drum unit when you carry it. DO NOT hold the sides of the drum unit.
5. Unpack the new drum unit.
6. Remove the protective cover.
266