Brother HLL9410CDN Enterprise Color Laser Printer - Manual (Page 320)

Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables > Feature Tables
Feature Tables
>> Toner
>> Wi-Fi Setup
>>
[Web]
>> [Direct Print]
>> [Secure Print]
Toner
(Toner)
Level 2 Level 3 Level 4 Descriptions
( Toner )
Toner Life - View the approximate remaining toner life for each color.
Test Print - Print the test page.
Color Correction Correction
Start
Perform color calibration to check and correct colors, and
then perform registration to align the print position of
each color.
Reset Reset the calibration parameters to the default settings.
Wi-Fi Setup
(Wi-Fi Setup)
Level 2 Level 3 Descriptions
( Wi-Fi Setup ) TCP/IP 1 Change the TCP/IP settings.
Find Wi-Fi Network Configure your wireless network settings manually.
WPS/Push Button Configure your wireless network settings using the one-button push
method.
WPS/PIN Code
1 Configure the wireless network settings using WPS with a PIN code.
WLAN Status 1 Display the wireless network connection status.
MAC Address
1 Display the MAC address of the machine.
Set to Default
1 Restore wireless network settings of your machine to the factory
settings.
WLAN Enable 1 Turn the wireless interface on or off.
1 Available after a Wi-Fi ® connection has been configured.
NOTE
For certain models, the wireless network connection can be used only when the optional Wireless Module is
installed.
315