NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 207)

6. From the Interface menu, select an interface on which the reception of LLDP frames
is enabled.
7. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Table 50. LLDP remote device information
Description Field
The ID of the remote device. Remote ID
The MAC address of the remote device. Switch ID
The switch identifier is the MAC address of the remote device (see the
previous field). Switch ID Subtype
The identifier that is associated with the interface on the remote device. Port ID
The type of the port identifier on the remote device. Port ID Subtype
The system name, if any, of the remote device. System Name
The description of the remote device. System Description
The interface name, if any, of the interface on the remote device. Port Description
The system capabilities that are supported on the remote device. System Capabilities Supported
The system capabilities that are enabled on the remote device. System Capabilities Enabled
The time-to-live period in seconds of the received remote entry. Time to Live
The type of the management IP address of the remote device. Management Address Type
The advertised management IP address of the remote device. Management Address
Display the LLDP remote device inventory
The LLDP inventory consists of the devices that LLDP detects.
To display the LLDP remote device inventory:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
Main User Manual 207 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual