NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 573)

The following table describes the view-only fields on the page.
Table 139. MLD Routing Interface Configuration
Description Field
The operational status of MLD on the Interface. Operational Mode
The robustness setting for the interface. The default value is 2. Robustness
Display the statistics for the MLD routing
interfaces
You can display the statics for the MLD routing interfaces.
To display the statistics for the MLD routing interfaces:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > IPv6 Multicast > MLD > Routing Interface Statistics.
The Routing Interface Statistics page displays.
6. Select whether to display physical interfaces, VLANs, or both by clicking one of the
following links above the table heading:
• 1 or Unit ID for a stacked switch:
Main User Manual 573 Configure Multicast Routing
Fully Managed Switches M4350 Series Main User Manual