NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 799)

15. In the Destination MAC Mask field, specify the destination MAC address mask that
must be compared against the information in an Ethernet frame.
The format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a
destination MAC mask of 00:00:00:ff:ff:ff.
16. From the EtherType Key menu, select the EtherType value that must be compared
against the information in an Ethernet frame.
The values are as follows:
• Apple Talk
• IBM SNA
• IPv4
• IPv6
• IPX
• MPLS Multicast
• MPLS Unicast
• NetBios
• Novell
• PPPOE
• RARP
• User Value
17. If you select User Value from the EtherType Key menu, in the EtherType User
Value field, specify the customized EtherType value that must be used.
This value must be compared against the information in an Ethernet frame. The
range is from 0x0600 to 0xFFFF.
18. In the Source MAC field, specify the source MAC address that must be compared
against the information in an Ethernet frame.
The format is xx:xx:xx:xx:xx:xx.
19. In the Source MAC Mask field, specify the source MAC address mask that must be
compared against the information in an Ethernet frame.
The format is xx:xx:xx:xx:xx:xx.
20. In the VLAN field, specify the VLAN ID that must be compared against the information
in an Ethernet frame.
The range is from 1 to 4093. You can configure either a single VLAN or a VLAN range.
21. From the Logging menu, select whether to enable or disable logging.
This option is available if the selection from the Action menu is Deny.
Main User Manual 799 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual