Leprecon LP-1600 Series - Manual (Page 12)

12
2.3.1. Video Output - Patch Data
In CUE Plus models, dimmer patch data is continuously output to the external
VGA display. Pressing the SETUP menu button will cause the Dimmer Patch
screen to be displayed as shown below. Note the Block Patch Assignment of
dimmers 5 through 10 to board channel 10 at 75%:
2.4. Clearing Memory
Cues, chases and patches recorded into the LP1600 are stored in battery-
backed memory. The lithium coin cell that is used will retain memory in the
console for a minimum of 1 year.
When starting to program a new show, it is easier to start with an empty board.
The Erase function in the LP1600 can be used to delete all cues, chases and
patches, leaving the scenes empty and ready to program. All fade times, links
and delay times will also be cleared, and default values will be inserted for
these parameters in all locations.
Four screens are provided for the Erase function. The user can elect to erase all
Presets scenes, to erase all Cue Stacks, or to erase the Custom Chases (chases
5-11). The final screen allows ALL MEMORY of the LP1600 to be cleared.