Leprecon LP-1600 Series - Manual (Page 32)

32
Delay
(10 secs)
Fade-in
(2 secs) Fade-out
(4 secs)
Cue “n - 1” Cue “n” Cue “n + 1”
To enter fade times, press the “Stack” button below the display. The top menu
will, as before, read:
Now 0 Fd In
Nxt 1 0:00
Fade times are entered for the Next scene. Place the cursor under the digit 1
and enter the desired cue number by pressing Modify and rotating the data
wheel. When the correct cue number is displayed, release the Modify button
and move the cursor under the label Fd In. Again hold down the Modify button
and rotate the data wheel until the correct time is shown. Release the Modify
button to store the new time. To Modify the fade-out time for this cue, move the
Wheel right until the LCD display shows:
Now 0 Fd Out
Nxt 1 0:00
Modify the Fd Out time by pressing Modify and rotating the data wheel until
the desired fade-out time is displayed. To Modify the delay time for this cue,
move the Wheel right until the LCD display shows:
Now 0 Delay
Nxt 1 0:00
Modify the Delay time by pressing Modify and rotating the data wheel until the
desired delay time is displayed.
The timed fades have a range of 1 second to 9 minutes 59 seconds. A value of
zero seconds will produce an instant change from one scene to another. The
display format is minutes and seconds separated with a colon. A value of
INFinite means that the cue will remain active until the Go button is pressed
again.