Leprecon LP-1600 Series - Manual (Page 14)

14
2.4.1. Video Output - Setup
In CUE Plus models, the Memory Erase menu choices are accessed by first
pressing SETUP. Move the Wheel to the right until the menu shown below,
called the SETUP Parameters Menu window, is displayed. The currently active
menu choice within the window will be highlighted, and should correspond to
the menu choice on the LCD display.
The second line in the pop-down window gives instructions for selecting and
executing menu choices. Traversing to the Erase All Scenes field, the second
half of the instructions will change to:
“Change Option using Modify”.
Press MODIFY and the instruction will change to:
“Execute Option Using Record”.
Press RECORD to erase all scenes. To abort the command, either press RUN, or
just wait 5 seconds for the operation to timeout.
Figure 1 SETUP Parameters Menu Screen