Cancelling bracketing – Nikon Z9 Mirrorless Camera User Manual
Page 182
182
Bracketing
A
Exposure Bracketing
The settings (shutter speed and/or aperture) altered during exposure
bracketing vary with the shooting mode.
1
If [
ON
] is selected for [
ISO sensitivity settings
] > [
Auto ISO sensitivity
control
] in the photo shooting menu, the camera will automatically vary
ISO sensitivity for optimum exposure when the limits of the camera
exposure system are exceeded.
2
If [
ON
] is selected for [
ISO sensitivity settings
] > [
Auto ISO sensitivity
control
] in the photo shooting menu, the camera will vary ISO sensitivity.
3
Use Custom Setting e6 [
Auto bracketing (mode M)
] to choose whether
the camera varies both shutter speed and aperture or any one of shutter
speed, aperture, and ISO sensitivity when [
OFF
] is selected for [
ISO
sensitivity settings
] > [
Auto ISO sensitivity control
] in the photo
shooting menu.
❚❚
Cancelling Bracketing
To cancel bracketing, press the
BKT
button and rotate the main
command dial until the number of shots in the bracketing sequence is
zero (
0F
). The program last in effect will be restored the next time
bracketing is activated. Bracketing can also be cancelled by performing
a two-button reset (
209), although in this case the bracketing
program will not be restored the next time bracketing is activated.
Mode
Setting
P
Shutter speed and aperture
1
S
Aperture
1
A
Shutter speed
1
M
Shutter speed
2, 3