Nikon Z9 Mirrorless Camera - Manual (Page 359)

359 Computers: Connecting via Ethernet or Wireless LAN
❚❚
The [Connect to Computer] Upload Status Display
The [ Connect to computer ] display shows the following:
D Loss of Signal
Wireless transmission may be interrupted if the signal is lost. Upload of
pictures with upload marking can be resumed by turning the camera off and
then on again once the signal has been re-established.
4 3 2
1
1 Status : The status of the
connection to the host. The
profile name is displayed in
green when a connection is
established.
While files are being
transferred, the status display
shows “Now uploading”
preceded by the name of the
file being sent. Errors are also
displayed here.
2 Signal strength : Ethernet
connections are shown by d .
When the camera is connected
to a wireless network, the icon
instead shows the wireless
signal strength.
3 Band : The band used by the
wireless network to which the
camera is connected in
infrastructure mode.
4 Pictures/time remaining : The
number of pictures remaining
and the time needed to send
them. The time remaining is an
estimate only.