Liebert iCOM Microprocessor TM-10098 - Manual (Page 150)

iCOM
Control Training and Service Manual
Code Service contacts Type
U703 Address line 1 System
U704 Address line 2 System
U705 Address line 3 System
U706 Address line 4 System
Service Menu
Code Setpoints Type
S102 Temperature setpoint Unit
S103 Humidity setpoint Unit
S104 Predictive Humidity control Unit
S105 Supply Limit Unit
S106 Supply Limit Value Unit
S107 Autoset enable Unit
S108 Temperature proportional band Unit
S109 Temperature integration time Unit
S110 Temperature deadband Unit
S113 Humidity proportional band Unit
S114 Humidity integration time Unit
S115 Humidity deadband Unit
S116 DT between Room / Glycol Type Unit
S117 DT between Room / Glycol Value Unit
S118 Min.Chilled Water Temp. Enable Unit
S119 Min.Chilled Water Temp. Value Unit
Code Standby settings / Lead-lag Type
S502 Number of standby units System
S503 Rotation Frequency System
S504 Rotate at (hour) System
S505 Rotate at (minute) System
S506 Rotate by System
S507 Perform one rotation System
S508 Cascade units System
Code Wellness / General Settings Type
S002 Maintenance frequency System
S003 Max bonus System
S004 Max penalty System
S005 Last maintenance System
S006 Service engineer System
S007 Reset System
S008 Calculated next maintenance System
149