QuickLabel Vivo! Touch - Manual (Page 18)

Safety Information
4 Vivo! Touch User Guide
• The cutter blade is sharp. Use caution to avoid personal injury or damage to
clothing when working with cutting blades or around exposed blade surfaces.
• Label material should never be left under the fuser.
Cautions
• Never expose image drums to light for more than 5 minutes.
• Always hold image drums by the ends.
• Never expose image drums to direct sunlight.
• Be careful to place the drums on a flat surface so that nothing contacts the shiny
green surface in the bottom of the drum.
• Avoid contact with the green drum inside the image drum unit, except as
described in the cleaning procedures in this manual.
• After switching the printer off, wait at least 10 seconds after the printer fully shuts
down (LED light next to display changes to amber color) before switching it on
again. This allows the internal power levels to drop. Switching on too soon could
cause the printer to malfunction.
• Dispose of the toner cartridge in accordance with local legislation.
• Do not use methyl alcohol or other solvents on the LED head. Otherwise, damage
to the lens may occur.