JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 103)

Selecting Multiple Clips Consecutively
1 Press the [USER4] button.
2 Select “Select Range” in the action
selection screen, and press the Set button
(
R
).
.
FTP Upload...
Delete OK Mark...
Add OK Mark...
Deselect All
Select Range
Select OK Marked
Select All Clips
2
3 Move the cursor to the beginning (or end)
of the range for multiple selection, and
press the Set button (
R
).
4 Move the cursor to the other end of the
range.
0 Magenta check marks appear on the clips
within the range. (Including clips that were
already selected.)
0 Gray check marks appear on selected clips
that are outside the range.
.
3
4
Selected Range:
Selected Range:
End Position
Start Position
5 Press the Set button ( R ) to confirm the
range.
0 The check marks change from magenta to
green.
0 Pressing the [USER4] button while the
multiple clips are selected displays the action
selection screen. The following operations
can be performed.
0
Appends OK mark together:
[Add OK Mark]
B
[Selected Clips]
0
Deletes OK mark together:
[Delete OK Mark]
B
[Selected Clips]
0
Uploading selected clips to the FTP server
together:
[FTP Upload]
B
[Selected Clips]
0
Deletes selected clips together:
[Delete Clips]
B
[Selected Clips]
Memo :
0 Selecting clips appended with check mark and
pressing the [USER3] button will cancel the
selection.
0 If the operation is performed on multiple clips at
the same time, a progress bar appears. You can
stop the operation by pressing the Set button (
R
)
while the operation is in progress. However, it is
not possible to undo operations that are
completed.
Selecting and Performing Operations on Multiple Clips
103
Playback