JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 91)

Clip Continuous Rec 0
0 In normal recording, when the recording stops,
the image, audio, and accompanying data from
the start till the end of the recording are recorded
as one “clip” on the SD card.
0 This mode allows you to consolidate several
rounds of “startstop recording” into one clip.
Example:
In normal recording, three clips are generated as
Recording 1, Recording 2, and Recording 3.
However, recording in this mode generates only
one clip.
.
(Recorded video and audio)
Completed Clip
Recording 3 Recording 2 Recording 1
Recording 3 Recording 2 Recording 1
(Recording stops)
Press and hold [REC]
(Recording pauses)
Press [REC]
(Recording pauses)
Press [REC]
(Recording resumes)
Press [REC]
(Recording resumes)
Press [REC]
(Recording starts)
Press [REC]
1 Set “Rec Mode” to “Clip Continuous”.
(
A
P154 [ Rec Mode 0 1 ] )
0 Set [System]
B
[Record Set]
B
[Rec Mode]
to “Clip Continuous”.
0 The display changes (“STBY”
B
“STBY
C
”).
2 Start recording. (Recording 1)
0 Press the [REC] button to start recording in
Clip Continuous mode.
0 The display changes (“STBY
C
”
B
“
R
REC
C
”) and the card slot status indicator
lights up in red.
3 Pause recording.
0 Press the [REC] button again to pause
recording. The display changes (“
R
REC
C
”
B
“STBY
C
” (yellow text)).
0 The card slot status indicator remains lighted
in red.
Memo :
0 When the [CANCEL/RESET] button is pressed
while the camera recorder is paused (STBY
C
),
the display changes (“STBY
C
” (yellow text)
B
“STBY
C
” (blinking yellow text)
B
“STBY
C
”
(white text)), and a “clip” is generated. The card
slot status indicator lights up in green.
4 Resume recording. (Recording 2)
0 Press the [REC] button again to resume
recording. The display changes (“STBY
C
”
(yellow text)
B
“
R
REC
C
”).
0 The card slot status indicator remains lighted
in red.
5 Pause recording.
0 Press the [REC] button again to pause
recording. The display changes (“ R REC
C
”
B
“STBY
C
” (yellow text)).
0 The card slot status indicator remains lighted
in red.
6 Resume recording. (Recording 3)
0 Press the [REC] button again to resume
recording. The display changes (“STBY
C
”
(yellow text)
B
“
R
REC
C
”).
0 The card slot status indicator remains lighted
in red.
7 Press and hold the [REC] button.
0 Recording stops and the display changes
(“ R REC
C
”
B
“STBY
C
”). A “clip” is
generated.
0 The card slot status indicator lights up in
green.
8 Press the [REC] button again.
0 The display changes (“STBY
C
”
B
“ R REC
C
”) and the card slot status indicator
lights up in red.
0 A new “clip” is generated from here.
Special Recording 0
91
Sh
ooting