JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 109)

Camera Function Menu
Menu screen for specifying operation settings
during shooting.
This item can only be selected in the Camera
mode.
Chroma Aberration
For configuring whether to apply ALAC (Auto Lens
Aberration Compensation) to reduce chromatic
aberration of magnification which appears as
colored outlines.
0 Auto:
Configures to ALAC automatically when an
ALAC-compatible lens is used.
0 Off:
Disables the ALAC function.
[Setting Values:
R
Auto, Off]
Memo :
0 This function does not support CAC lenses,
which adopts a different method of
compensation from ALAC lenses.
0 This function does not correct axial chromatic
aberration.
0 When in the “Auto” mode, chromatic aberration
correction is functioning if chromatic aberration
correction on the status screen (camera) is
configured to “On”.
Pixel Mapping
Detects white spots in the sensor and performs
correction to reduce the defect. To perform pixel
mapping, do so in the Camera mode after attaching
the lens cap.
[Setting Values: Execute, R Cancel]
Memo :
0 It is recommended to use the AC adapter as the
power supply.
0 Selection for this item is disabled when [System]
is configured to “High-Speed” 2 .
Shutter
For specifying shutter-related settings.
When “Slow” or “Step/Variable” is selected,
configure the shutter speed by pressing “SEL” of
the [SHUTTER] switch and using the cross-shaped
button (
J K
).
The cross-shaped button ( H I ) can also be used
to switch between step and variable.
0 Slow:
Configures the shutter speed to low speed.
0 EEI:
Select this to perform automatic control of the
shutter.
0 Step/Variable:
Step mode switches the shutter speed in fixed
values. Selecting Variable configures the setting
to variable scan. Use this setting when shooting
a PC monitor.
[Setting Values: Slow, EEI, R Step/Variable]
Memo :
0 When “J-Log1” or “HLG” is selected for [Camera
Process]
B
[Color Space], “EEI” cannot be
selected.
AE Level
For setting the convergence level during AE (Auto
Exposure).
[Setting Values: -6 to +6 (
R
0)]
Memo :
0 When “J-Log1” or “HLG” is selected for [Camera
Process]
B
[Color Space], [AE Level] cannot be
configured.
0 AE level can also be configured using the cross-
shaped button ( J K ) after operating the user
button that is assigned with the AE Level
function.
AE Speed
For setting the convergence speed during AE (Auto
Exposure).
[Setting Values: R Fast, Middle, Slow]
AE Area
For configuring the AE detection area.
[Setting Values: Center, Bottom,
R
Normal]
Camera Function Menu
109
Menu
Display and
D
etailed
S
etti
ngs