JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 165)

V
Time Code ( I )/User’s Bit ( J ) Display
0 Displays the time code (hour: minute:
second: frame) or user’s bit data.
0 Example of time code display:
Display Screen
.
0 0 : 0 0 : 0 0 : 0 0
*
* Colon (:) denotes non-drop frames and dot
(.) denotes drop frames.
Enlarged Display
[NDF] is displayed to the right of [TC] in the
case of non-drop frames and [DF] in the case
of drop frames.
.
00
H
00
M
00
S
00
F
NDF
R-RUN
0 Example of user’s bit display:
Display Screen
.
F F E E D D 2 0
Memo :
0 Use the [TC DISPLAY] switch to toggle between
the time code display and user’s bit display.
W Time Code Lock Indicator
When the built-in time code generator is
synchronized to the external time code data
input during the synchronization of time code
with another camera recorder, Z lights up.
When in the enlarged display mode, [EXT Z ] is
shown in the TC mode display.
X IFB/RET Mark
Displays the status of the IFB or Return over IP.
Icon Status
.
During audio feed only
.
(Yellow)
When an error occurs during
audio feed only
.
During video+audio feed
. (Yellow)
When an error occurs during
video+audio feed
Y
SDI/HDMI Record Trigger
STBY
B
: When [SDI Rec Trigger] is set to
“Type-A” or “Type-B”, or [HDMI Rec
Trigger] is set to “On” and recording
is stopped
REC
B
: When [SDI Rec Trigger] is set to
“Type-A” or “Type-B”, or [HDMI Rec
Trigger] is set to “On” and recording
is in progress
Z GPS Mark u v
When [System]
B
[GPS] is set to “On”, the
signal reception status is displayed.
Memo :
0 The display changes according to the signal
reception sensitivity. If signals cannot be
received, the H mark appears in yellow
regardless of the [LCD/VF]
B
[Display On/Off]
B
[GPS] setting.
0 This item is not displayed when [GPS] is set to
“Off”.
Display Screen in Camera Mode
165
Display/S
ta
tus
S
cr
ee
n