JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 127)

9 Top 1
For setting the maximum luminance level to display
Zebra1.
[Setting Values: Over, 100%, 98%, 95% to 5% (in
5% increments)] (
R
80%)
9 Bottom 1
For setting the minimum luminance level to display
Zebra1.
[Setting Values: 100%, 98%, 95% to 0% (in 5%
increments)] ( R 70%)
9 Top 2
For setting the maximum luminance level to display
Zebra2.
[Setting Values: Over, 100%, 98%, 95% to 5% (in
5% increments)] ( R Over)
Memo :
0 This item cannot be selected when [Zebra] is set
to “1 Pattern”.
9 Bottom 2
For setting the minimum luminance level to display
Zebra2.
[Setting Values: 100%, 98%, 95% to 0% (in 5%
increments)] (
R
80%)
Memo :
0 This item cannot be selected when [Zebra] is set
to “1 Pattern”.
Peaking Frequency
For configuring the frequency band for applying
outline enhancement using [LCD Peaking] and the
[PEAKING] adjustment knob on the viewfinder.
[Setting Values: High,
R
Middle, Low]
Video Signal Monitor
For configuring whether to display or hide the video
signal monitor.
[Setting Values: On,
R
Off]
Memo :
0 This may not be selectable depending on the
operating mode and status.
9 Type
For configuring the video signal monitor to be
displayed.
0 Histogram 2 :
Displays the distribution of points in the image
based on the degree of brightness and the
corresponding number of points.
0 Vector Scope:
Displays the saturation and hue of the video as
a circle.
0 Waveform:
Displays the luminance signal of the video as a
waveform.
[Setting Values: Histogram 2 , Vector Scope,
R Waveform]
9 Histogram Top 2
For selecting the maximum brightness limit for
changing the histogram display color.
[Setting Values: 5% to 110% (in 5% increments)]
( R 80%)
0 When [Color Space] is set to “J-Log1”
[Setting Values: -5F-stop, -4F-stop, -3F-stop(2%),
-2F-stop, -1F-stop, 0F-stop(18%), ⅓ F-stop, ⅔ F-
stop, 1F-stop, 1 ⅓ F-stop, 1 ⅔ F-stop, 2F-stop, 2 ⅓
F-stop(90%), 2 ⅔ F-stop,
R
3F-stop, 3 ⅓ F-stop, 3
⅔ F-stop, 4F-stop, 4 ⅓ F-stop, 4 ⅔ F-stop, 5F-
stop, 5 ⅓ F-stop, 5½F-stop]
Memo :
0 When [Color Space] is set to “J-Log1”, a green
line appears which corresponds to the 0F-stop
(18%) portion of the subject with 18%
reflectance.
9 Histogram Bottom 2
For selecting the minimum brightness limit for
changing the histogram display color.
[Setting Values: 0% to 105% (in 5% increments)]
(
R
20%)
0 When [Color Space] is set to “J-Log1”
[Setting Values: -6F-stop, -5F-stop, -4F-stop,
R -3F-stop(2%), -2F-stop, -1F-stop, 0F-stop(18%),
⅓ F-stop, ⅔ F-stop, 1F-stop, 1 ⅓ F-stop, 1 ⅔ F-
stop, 2F-stop, 2 ⅓ F-stop(90%), 2 ⅔ F-stop, 3F-
stop, 3 ⅓ F-stop, 3 ⅔ F-stop, 4F-stop, 4 ⅓ F-stop,
4 ⅔ F-stop, 5F-stop, 5 ⅓ F-stop]
Memo :
0 When [Color Space] is set to “J-Log1”, a green
line appears which corresponds to the 0F-stop
(18%) portion of the subject with 18%
reflectance.
LCD/VF Menu
127
Menu
Display and
D
etailed
S
etti
ngs