JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 83)

Acquiring Positioning
Information by GPS
v
u
This camera recorder comes with a built-in GPS
function. The GPS function is able to record the
positioning information.
During playback, you can also display the recorded
information on the playback screen.
(
A
P99 [Playing back] )
1 Set [System]
B
[GPS] to “On”.
0 Positioning starts when the H icon on the
display screen starts blinking.
0 After positioning is complete, the H icon
switches to a solid light and records the
positioning information during shooting.
0 The icon that appears on the screen changes
according to the condition of signal reception
from the GPS satellite.
.
100min
50min
282min
1/ 60 F2. 8
AE ± 0 ND 1 /64
12 :34 : 56
ISO 102400
00: 00: 00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6f t
B 5600 K
Display
Reception
Status
Positioning Status
. (Yellow)
[GPS] is set to
“On”, but signal
cannot be
received
GPS signal cannot
be received. UTC
and positioning
information cannot
be obtained.
.
(Blink)
GPS search in
progress
UTC information
can be obtained,
but not positioning
information.
.
GPS reception
in progress
(signal strength:
weak)
Receiving weak
GPS signal. UTC
and positioning
information can be
obtained and
recorded.
.
GPS reception
in progress
(signal strength:
medium)
Receiving GPS
signal. UTC and
positioning
information can be
obtained and
recorded.
Display
Reception
Status
Positioning Status
.
GPS reception
in progress
(signal strength:
strong)
Receiving strong
GPS signal. UTC
and positioning
information can be
obtained and
recorded.
(No
display)
GPS function is
turned off
The [GPS] item is
set to “Off”.
Memo :
0 If positioning cannot be performed after waiting
for several minutes, this means GPS reception
is poor, and there is difficulty in receiving data.
Move to an open place with no obstructions.
Otherwise, GPS information will not be recorded
when shooting is performed.
0 Signal may not be received depending on
circumstances such as locations that are
indoors or surrounded by tall buildings, or the
geographical conditions.
Precision error may occur in the position
information depending on the conditions of
reception.
0 Even when positioning is in progress,
information may be disrupted depending on the
condition of signal reception.
0 When [A/V Set]
B
[Video Set]
B
[SDI OUT1
Res.] is set to “1080p”, configuring [System]
B
[GPS] to “On” changes the setting to “1080i”.
Acquiring Positioning Information by GPS v u
83
Sh
ooting