JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 57)

o When [System] is set to “SD” or “SD(SDI In)”:
2
Record Format
W Format W
Resolution
W Frame
Rate
W Bit Rate W Audio
QuickTime
(H.264)
720x480 60i
(U model)
8M (HQ) 4CH 16 bit/
2CH 16 bit
720x576 50i
(E model)
Memo :
0 Each item for slot B is fixed at the same setting
as slot A.
o When [System] is set to “HD+Web”, the options
for slot B are 2 :
Record Format
Y Format Y
Resolution
Y Frame
Rate
Y Bit Rate Y Audio
QuickTime
(H.264)
960x540 30p, 25p,
24p
3M (HQ) 4CH/
2CH
720x480 60i 8M (HQ) 4CH 16 bit/
2CH 16 bit
720x576 50i 8M (HQ)
480x270 30p, 25p,
24p
1.2M (LP) 4CH/
2CH
Memo :
0 The following functions cannot be used when
HD+Web is selected.
View Remote, Live Streaming, Return over IP
Selecting the Aspect Ratio of SD Videos
2
For setting the aspect ratio of the recorded image
when [System] is set to “SD” or “SD(SDI In)”.
You can select “16:9” or “4:3”.
Memo :
0 For conditions other than those above, this item
is fixed at “16:9”.
Zoom Operation
Adjusts the angle of view.
Zooming can be operated using the following.
0 Zoom ring/zoom lever on the commercially
available lens
0 User buttons assigned with “Zoom Tele” and
“Zoom Wide”
During the zoom operation, the zoom bar or
number will appear on the upper right corner of the
screen.
(
A
P164 [Zoom Display] )
Caution :
0 Depending on the zoom speed, the zoom drive
noise of the power zoom may be recorded.
Using Zoom Ring/Zoom Lever on
Commercially Available Lens
You can adjust the preferred angle of view by
turning the zoom ring or operating the zoom lever.
Memo :
0 For details on the lens, please refer to the
“INSTRUCTIONS” of the lens used.
Using User Buttons Assigned with
“Zoom Tele” and “Zoom Wide”
1 Assign “Zoom Tele” and “Zoom Wide” to
the user buttons.
(
A
P45 [Assignment of Functions to User
Buttons] )
(
A
P111 [User Switch Set Item] )
0 Configure the zoom speed of the user
buttons in [Camera Function]
B
[User Switch
Set]
B
[Zoom Speed].
Increasing the value increases the zoom
speed.
2 Press the user button assigned with “Zoom
Tele”/“Zoom Wide” to zoom.
0 The zoom operation is performed in the
speed that has been set.
Memo :
0 This function may not work depending on the
lens attached.
Selecting System Definition, File Format and Video Format
57
Sh
ooting