JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 133)

HDMI Enhance
For setting the color range of HDMI signals. When
connecting to a PC monitor, set this to “On”.
[Setting Values: On,
R
Off]
Memo :
0 This item can be configured when [HDMI OUT]
is set to a setting other than “Off”.
SDI Rec Trigger
For configuring whether to superimpose trigger
signals on the [HD/SD SDI OUT] terminal in tandem
with the [REC] button.
If “Type-A” or “Type-B” is specified, it is possible to
record on a device equipped with SDI record trigger
in tandem with the operation of the [REC] button.
When a compatible device is connected,
recording/stop control signals are output in tandem
with the operation of the [REC] button.
The SDI record trigger output status to the
connected device is indicated by REC
B
/STBY
B
on the display screen.
[Setting Values: Type-A, Type-B, R Off]
Memo :
0 If “Type-A” does not work, it may operate in the
“Type-B” setting, but the user’s bit to the
connected device will not be correctly output.
0 Even if REC
B
/STBY
B
is displayed on the
display screen, the compatible device may not
necessarily be recording.
0 This item can be configured when [SDI OUT1]
is set to “On” or [SDI OUT2] is set to a setting
other than “Off”, and [Rec Mode] is set to
“Normal”, “Pre Rec” 0 or “Clip
Continuous” 0 .
0 Set to “Off” if connecting to a device that does
not support record trigger.
HDMI Rec Trigger
For configuring whether to superimpose trigger
signals on the [HDMI] out terminal in tandem with
the [REC] button.
If “On” is specified, it is possible to record on a
device equipped with HDMI record trigger in
tandem with the operation of the [REC] button.
When a compatible device is connected,
recording/stop control signals are output in tandem
with the operation of the [REC] button.
The HDMI record trigger output status to the
connected device is indicated by REC
B
/STBY
B
on the display screen.
[Setting Values: On,
R
Off]
Memo :
0 Even if REC
B
/STBY
B
is displayed on the
display screen, the compatible device may not
necessarily be recording.
0 This item can be configured when [HDMI OUT]
is set to a value other than “Off”, and [Rec
Mode] is set to “Normal”, “Pre Rec” 0 or
“Clip Continuous” 0 .
0 Set to “Off” if connecting to a device that does
not support record trigger.
HDMI TC
For setting whether to superimpose time code to
the [HDMI] terminal.
[Setting Values: On,
R
Off]
Memo :
0 This item can be configured when [HDMI OUT]
is set to a setting other than “Off”.
0 Set to “Off” if connecting to a device that does
not support HDMI TC.
A/V Set Menu
133
Menu
Display and
D
etailed
S
etti
ngs