JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 73)

Audio Output during
Recording
0 You can check the recorded audio from the
monitor speaker or the headphone connected to
the [PHONE] terminal.
0 Adjust the volume of the speaker or headphone
using the [MONITOR] volume adjustment knob.
.
Memo :
0 Warning tone is output when there is an
abnormality in the camera recorder or when the
battery is low.
(
A
P222 [Warning Tone] )
0 The volume of the warning tone can be adjusted
using the [ALARM] volume adjustment knob or
configured in [A/V Set]
B
[Audio Set]
B
[Min.
ALARM Level].
(
A
P137 [ Min. ALARM Level ] )
Time Code and User’s Bit
Time code and user’s bit data are recorded with the
video in this camera recorder.
The time code and user’s bit are displayed on the
viewfinder and LCD monitor during playback or
recording. (Display screen)
Displaying Time Code and User’s Bit
The time code and user’s bit are displayed on the
viewfinder and LCD monitor during playback or
recording.
The display differs according to the menu settings.
1 Set [LCD/VF]
B
[Display On/Off]
B
[TC/UB]
to “On”.
(
A
P130 [Display On/Off Item] )
When “TC” or “UB” is selected, time code or
user’s bit data is displayed respectively on the
display screen.
.
100min
50min
282min
1/ 60 F2. 8
AE ± 0 ND 1 /64
12 :34 : 56
ISO 102400
00: 00: 00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6f t
B 5600 K
0 0
H
0 0
M
0 0
S
0 0
F
A B C D E F 8 9
2 Select the display using the [TC DISPLAY]
TC/UB display switch.
Select time code display ([TC]) or user’s bit
display ([UB]).
Audio Output during Recording
73
Sh
ooting