JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) User Manual
Page 64
Memo :
0
Use the user button assigned with “Full Auto” to
enter the Full Auto mode also activates the
Automatic White Balance mode. In this case, the
Iris, Gain and Shutter also enter into Auto mode
forcibly.
0
The white balance operation during Full Auto
mode can be configured in [Camera Function]
B
[Full Auto]
B
[White Balance].
0
When [Camera Function]
B
[User Switch Set]
B
[AE Lock] is set to “AE/FAW” or “FAW”, the white
balance when the user button that is assigned
with [AE Lock] is pressed can be fixed while in
the Automatic White Balance mode.
0
If [White Balance] is assigned to the user button,
pressing the assigned user button will display
the FAW Paint Adjustment screen.
P45 [Assignment of Functions to User
FAW Paint Adjustment
You can fine-adjust the white balance that was
automatically adjusted.
1
Select [Camera Process]
B
[White
Balance]
B
[FAW Paint] and press the Set
button (
R
).
The FAW Paint Adjustment screen appears.
.
1
FAW Paint
White Balance
2
Adjust the R and B values.
Use the cross-shaped button (
JK
) to adjust R
value and (
HI
) to adjust B value.
.
B
R
3
Press the Set button (
R
).
Returns to the [White Balance] screen.
.
B Value
R Value
FAW Paint
White Balance
Manual White Balance Mode (Manual
Switching)
1
Set Full Auto mode to off using the user
button assigned with “Full Auto”.
0
Use the [WHT.BAL] switch to select “PRST”
(preset mode), “A” (memory A mode), or “B”
(memory B mode).
Memo :
0
You can set the Full Auto White Balance feature
to either [A], [B], or [PRST] in [Camera
Function]
B
[FAW].
0
The FAW (Full Time Auto White Balance) mode
makes automatic adjustments by sampling the
color temperature of the video to obtain the most
appropriate white balance level.
Preset Mode (PRST)
0
Two different color temperature settings are
registered on this camera recorder. You can
switch between them by pushing the [AWB/
USER8] switch upward or using the user button
assigned with “AWB”.
Default setting:
[Preset Temp.]
: 3200K
[Alternative Temp.] : 5600K
1
Set the [WHT.BAL] switch to “PRST”.
2
Push the [AWB/USER8] switch upward or
press the user button assigned with the
“AWB” function.
0
The color temperature switches.
(“Preset Temp.”
1
“Alternative Temp.”)
64
Adjusting the White Balance
Sh
ooting