JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 166)

a
Media Status
---- : A card is not detected in the
selected slot, and [Tally
System] is also not set to
“Studio”
STBY : Recording standby
R
REC : Recording
REVIEW : Clip Review
(
A
P84 [Viewing Recorded Videos Immediately
(Clip Review)] )
STBY
P
: Pre Rec recording standby
(
A
P90 [Pre Rec 0 ] )
R REC
P
: Pre Rec recording
(
A
P90 [Pre Rec 0 ] )
STBY
C
: Clip Continuous Rec recording
standby
(
A
P91 [Clip Continuous Rec 0 ] )
R REC
C
: Clip Continuous Rec recording
(
A
P91 [Clip Continuous Rec 0 ] )
STBY
C
(displayed in
yellow)
: Clip Continuous Rec recording
pause
(
A
P91 [Clip Continuous Rec 0 ] )
STBY N : Interval Rec recording standby
(
A
P93 [Interval Rec 1 ] )
STBY N
(displayed in
red)
: Interval recording pause
R
REC N : Interval Rec recording
(
A
P93 [Interval Rec 1 ] )
STBY M : Frame Rec recording standby
(
A
P92 [Frame Rec 1 ] )
R REC M : Frame Rec recording
(
A
P92 [Frame Rec 1 ] )
STBY M
(displayed in
yellow)
: Frame Rec recording pause
(
A
P92 [Frame Rec 1 ] )
STOP : Unable to record to the card in
the slot
P.OFF : Power OFF
Q : During clip cutter recording
(displayed for 3 seconds)
(
A
P94 [Splitting the Clips Freely (Clip Cutter
Trig) 0 ] )
CALL : Receiving call signals from an
external device, such as a
remote control unit
PGM : Receiving program signals
from an external device, such
as a remote control unit
PVW : Receiving preview signals
from an external device, such
as a remote control unit
b
Live streaming mark
When [Network]
B
[Live Streaming]
B
[Live
Streaming] is set to “On”, the distribution status
is displayed.
(
A
P141 [Live Streaming Item] )
Icon Status
. (Red)
Distribution in progress (good
connection quality)
. (Red)
Distribution in progress (poor
connection quality)
.
(Yellow)
Waiting for connection
(RTSP/RTP only), connection
failed
c SDI Input Mode/High-Speed Frame Rate
0 “SDI IN Z ” is displayed when a device is
connected to the [HD/SD SDI IN] terminal,
and [System]
B
[Record Set]
B
[Record
Format]
B
[System] is set to “HD(SDI In)” or
“SD(SDI In)” 2 .
0 When [System]
B
[Record Set]
B
[Record
Format]
B
[System] is configured to “High-
Speed” 2 , the setting value for [ W Frame
Rate] is displayed.
d OK Mark
Displayed when OK mark has been appended.
(
A
P101 [Appending/Deleting OK Mark] )
e Recording Format/Bit Rate (Enlarged Display
Mode Only)
Displays the recording format and bit rate (only
when in the enlarged display mode).
Memo :
0 The resolution, frame rate and bit rate can be
viewed on the status screen.
f Event/Warning Display Area
Displays error messages.
(
A
P218 [Error Messages and Actions] )
g Dual Rec/ Backup Rec Display (Enlarged
Display Mode Only)
“DUAL” is displayed in the Dual Rec mode and
“BACKUP” is displayed in the Backup Rec
mode.
(
A
P155 [ Slot Mode ] )
Memo :
0 Displayed only when in the enlarged display
mode.
166
Display Screen in Camera Mode
Display/S
ta
tus
S
cr
ee
n