JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 110)

AGC Limit
For setting the maximum gain value of “AGC”,
which electrically boosts the sensitivity level
according to the brightness automatically.
0 When [LCD/VF]
B
[Display Type]
B
[Gain] is set
to “dB”:
[Setting Values: 30 dB, 24 dB,
R
18 dB, 12 dB,
6 dB]
0 When [LCD/VF]
B
[Display Type]
B
[Gain] is set
to “ISO”:
[Setting Values: ISO 25600, ISO 12800,
R
ISO
6400, ISO 3200, ISO 1600]
Auto Iris Limit (OPEN)
For setting the limit value of the OPEN end when
auto iris is enabled.
[Setting Values: F5.6, F4, F2.8,
R
F2, Open]
Auto Iris Limit (CLOSE)
For setting the limit value of the CLOSE end when
auto iris is enabled.
[Setting Values: F16, R F11, F8, F5.6]
EEI Limit
For setting the shutter speed control range when
the Automatic Shutter mode (EEI) is enabled.
[Setting Values: 4F-stop, R 3F-stop, 2F-stop]
Smooth Trans
For setting the shock reduction function, which
slows down the sudden change when switching
with the [GAIN] or [WHT.BAL] switch.
[Setting Values: On, R Off]
Memo :
0 This function is disabled when AGC is operating.
9 Gain
For configuring the speed at which gain changes
when [Smooth Trans] is set to “On”.
[Setting Values: Fast, R , Middle, Slow, Off]
9 Shutter
For configuring the speed at which the shutter
changes when [Smooth Trans] is set to “On”.
[Setting Values: Fast, R , Middle, Slow, Off]
9 White Balance
For configuring the speed at which white balance
changes when [Smooth Trans] is set to “On”.
[Setting Values: Fast, R , Middle, Slow, Off]
FAW
For setting the position in the white balance switch
[WHT.BAL] to assign the FAW (Full Auto White
Balance) function.
[Setting Values: B, A, PRST,
R
None]
FAW Speed
For configuring the operation speed of FAW (Full-
time Auto White Balance)
[Setting Values:
R
Fast, Middle, Slow]
GAIN L, GAIN M, GAIN H
For setting the gain value of each position on the
[GAIN] selection switch.
The setting is fixed at “AGC” in the Full Auto mode.
In addition, the sensitivity setting in [Lolux] is used.
(
A
P113 [ Lolux ] )
0 When [LCD/VF]
B
[Display Type]
B
[Gain] is set
to “dB”:
[Setting Values: AGC, 30 dB, 27 dB, 24 dB, 21
dB, 18 dB, 15 dB, 12 dB, 9 dB, 6 dB, 3 dB, 0 dB,
-3 dB, -6 dB]
(Default values for GAIN L: 0dB, GAIN M: 6dB,
GAIN H: 12dB)
0 When [LCD/VF]
B
[Display Type]
B
[Gain] is set
to “ISO” and [Camera Process]
B
[Color
Space] is set to a value other than “HLG”:
[Setting Values: AGC, ISO25600, ISO20000,
ISO16000, ISO12800, ISO10000, ISO8000,
ISO6400, ISO5000, ISO4000, ISO3200,
ISO2500, ISO2000, ISO1600, ISO1250,
ISO1000, ISO800, ISO640, ISO500, ISO400]
(Default values for GAIN L: ISO800, GAIN M:
ISO1600, GAIN H: ISO3200)
Memo :
0 “AGC” cannot be selected when “J-Log1” or
“HLG” is selected for [Camera Process]
B
[Color
Space].
0 When “J-Log1” is selected for [Camera
Process]
B
[Color Space], the base ISO speed
for achieving the 800% dynamic range of [J-
Log1] is “[ISO1000]”. The square brackets
appear only in the case of the base ISO.
110
Camera Function Menu
Menu
Display and
D
etailed
S
etti
ngs