JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 164)

P
Luminance Information
Displayed when the Spot Meter function is
activated.
MAX : Maximum luminance
MIN : Minimum luminance
Q Zebra pattern
During zebra pattern display, (zebra icon)
is displayed on the display screen in Camera
mode.
(
A
P80 [Setting Zebra Pattern] )
R Time Display
Displays the current time.
Memo :
0 The date/time display style can be configured in
[System]
B
[Date/Time].
0 When [System]
B
[Record Set]
B
[Time
Stamp] is set to “On”, this item is not displayed.
S
Focus Display
Displays the approximate distance to the
subject in focus during manual focus.
Memo :
0 The displayed unit of measurement (feet or
meter) can be configured in [LCD/VF]
B
[Display
Type]
B
[Focus].
0 This item may not be displayed depending on
the lens used.
T Zoom Display
0 Displays the zoom position. (Zoom bar or
value)
.
0 The zoom bar will only be displayed for 3
seconds after the zoom operation is
activated.
0 The value will always be displayed. (Z00 to
99)
Memo :
0 The mode of display (value or bar) can be
configured in [LCD/VF]
B
[Display Type]
B
[Zoom].
0 This item may not be displayed depending on
the lens used.
U
Network Connection Icon
0 USB connection or built-in wireless LAN
connection u v
0
Set [Network]
B
[Connection Setup]
B
[USB/Int. WLAN] to “On”. u v
(
A
P140 [ USB/Int. WLAN u v ] )
0
In the case of connecting to an external
network, check the destination in
[Network]
B
[Connection Setup]
B
[Default Gateway].
(
A
P140 [ Default Gateway ] )
Icon Status
.
Wireless LAN connection from the
host terminal (USB) is established
.
Wired LAN connection from the
host terminal (USB) is established
.
Cellular adapter connection from
the host terminal (USB) is
established
.
When a USB adapter different
from the connection settings is
detected
.
Built-in wireless LAN connection is
established
u v
(No
display)
0 When [USB/Int. WLAN] is set
to “Off”
u v
0 When an unusable USB
adapter is detected
Memo :
0 The icon appears blinking when the camera
recorder is starting up, and is displayed in yellow
while getting ready to connect.
0 LAN terminal connection
In the case of connecting to an external network,
check the destination in [Network]
B
[Connection Setup]
B
[Default Gateway].
Icon Status
.
LAN terminal connection is
established
(No
display)
When the LAN cable is not
connected
Memo :
0 The icon appears blinking when the camera
recorder is starting up, and is displayed in yellow
while getting ready to connect.
164
Display Screen in Camera Mode
Display/S
ta
tus
S
cr
ee
n