JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 87)

2 Start recording.
0 Insert recordable media in both slots, and
press the [REC] button.
0 In the Dual Rec mode, recording to the media
in both slots starts at the same time.
0 Both the card slot marks turn red, and the
status indicators of both the card slots also
light up in red.
.
100min
50min
282min
1/ 60 F2. 8
AE ± 0 ND 1 /64
12 :34 : 56
ISO 102400
00: 00: 00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6f t
B 5600 K
Lit in red
3 Stop recording.
0 Press the [REC] button again.
0 Recording to both slots stops, and both the
card slot marks turn white.
0 The same clips are recorded to both cards.
.
100min
50min
282min
1/ 60 F2. 8
AE ± 0 ND 1 /64
12 :34 : 56
ISO 102400
00: 00: 00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6f t
B 5600 K
White
Memo :
0 During recording in the Dual Rec mode, both the
card slot marks light up in red.
0 During recording in the Dual Rec mode to two
cards with a different amount of remaining
space, if the space of one card runs out,
recording to both slots will stop automatically.
After recording stops, recording automatically
resumes for the card with remaining space.
Although the clips are separated in this case, the
clips can be seamlessly joined by arranging
them on the timeline of the editing software since
they are recorded seamlessly.
0 If the last clip on the cards that are inserted in
the two slots are different from each other, and
the time code operating mode is set to
“REGEN”, the REGEN mode for the selected
card slot will be enabled in the next recording.
Caution :
0 To perform recording in the Dual Rec mode, it is
recommended that you start recording by
making use of two cards with the same capacity
and from the formatted state.
0 You can combine the use of the Dual Rec mode
with a special recording mode. While in the Dual
Rec mode, you can also set [Rec Mode] to
“Normal”, “Pre Rec”, “Clip Continuous”, “Interval
Rec”, or “Frame Rec”.
(
A
P90 [Special Recording 0 ] )
(
A
P154 [ Rec Mode 0 1 ] )
0 When both slots are inserted with recordable
cards, the Dual Rec (simultaneous recording)
operation can be performed. If a recordable
media is only inserted in one of the slots, you can
also start recording with one card.
0 In the Dual Rec mode, continuous recording by
switching from one slot to another cannot be
performed. Continuous recording will not be
performed if a recordable media is inserted in a
slot after recording to the other slot has started.
0 When recording to one slot is in progress with
the recorder set to the Dual Rec mode, inserting
a recordable media to the other slot does not
enable the Dual Rec operation. To perform the
Dual Rec operation, stop recording temporarily
(excluding pausing recording in the Clip
Continuous Rec mode), and start again.
0 When one of the cards is accidentally removed
while recording is in progress in the Dual Rec
mode, recording to the card in the other slot will
continue. However, repair of the accidentally
removed card by the recovery function may fail.
0 If an error occurs on one of the cards while
recording is in progress in the Dual Rec mode,
recording of the erroneous card stops, while that
of the other card continues.
0 Operations on clips recorded in the Dual Rec
mode, such as clip deletion in the Media mode
or appending of OK marks, can only be
performed on the card in the selected slot.
Dual Rec
87
Sh
ooting