Innotech Genesis V4 System - Manual (Page 104)

Installation Instructions for Innotech Genesis Systems
Edition 011100
A-23
If the screen is connected to the SHLD terminal of Port 1 of the Repeater Module, then the
connection of all other devices should ensure that the screen is isolated from the electrical
earth. See Figure A-22.
Figure A-22. Use of GENII RPTR Repeater Module, Circuit 2.
Switchboard or
Control Panel No. 2
Screen 1 2
Connect Screen
Screen 1 2
Connect Screen
Switchboard or
Control Panel No. 1
Connect Screen
Only four outer
links fitted.
Screen is not
earthed.
Only four outer
links fitted.
Screen is not
earthed.
Connect Screen
Ea
rt
h
2
1
Isolated
Not
Isolated
Repeater
Screen 1 2
Six outer links
fitted. Screen is
earthed via
Terminal 2.