Innotech Genesis V4 System - Manual (Page 68)

Installation Instructions for Innotech Genesis Systems
Edition 011100 4-13
Table 4-3. Analogue Input Checks.
AISC
MODEL
INPUT
TYPE
PARAMETER
MEASURED
EXPECTED
VALUE
REFERENCE
PARAGRAPH
AIM AISC From AIM LEM Inspect Wiring N/A 4-1.2.4
DO5 Digital Voltage 0 or 5Vdc 4-1.2.4.1
D33 Digital Voltage 0 or 10Vdc 4-1.2.4.1
I05 0 – 5mA Passive Current (See Note) 0 – 5mA 4-1.2.4.2
I20 4 – 20mA Passive Current (See Note) 4 – 20mA 4-1.2.4.2
P20 Loop Powered Inspect Wiring N/A 4-1.2.4.2
TD1 Current Loop Current (See Note) 0 – 250 A 4-1.2.4.2
TD2 0 - 500 A Current (See Note) 0 – 500 A 4-1.2.4.2
TH1 Thermistor Resistance 0 – 1k 4-1.2.4.3
TH2 Thermistor Resistance 0 – 2k 4-1.2.4.3
TH3 Thermistor Resistance 0 – 3.8k 4-1.2.4.3
TH4 Thermistor Resistance 0 – 8.2k 4-1.2.4.3
TH5 Thermistor Resistance 0 – 16.2k 4-1.2.4.3
TH6 Thermistor Resistance 0 – 33.2k 4-1.2.4.3
TH7 Thermistor Resistance 0 – 68.1k 4-1.2.4.3
TH8 Thermistor Resistance 0 – 121k 4-1.2.4.3
TH9 Thermistor Resistance 0 – 221k 4-1.2.4.3
V05 Voltage Voltage 0 – 5Vdc 4-1.2.4.1
V10 Voltage Voltage 0 – 10Vdc 4-1.2.4.1
Note: Current value is determined by measuring voltage across a resistor in series.