Innotech Genesis V4 System - Manual (Page 19)

Installation Instructions for Innotech Genesis Systems
Edition 011100 2-5
The system imposes restrictions on the total number and types of REMs that can be used
with a controller. These requirements are explained in Paragraph 2-4.1.
Figure 2-5. Typical Remote Expansion Module.
2-2.2.2.1. Remote Module Interface. The GENII RMI Remote Module
Interface (Figure 2-6) provides an interface between the Genesis II Digital Controller or
GENII MPC and the REMs. The Remote Module Interface is DIN rail-mounted close to
the controller and the REMs are installed at remote locations. Installation instructions
for the GENII RMI and the REMs are
contained in Paragraph 2-4.
ALL DIMENSIONS ARE
IN MILLIMETRES
DIN Rail
Mounted
A BC D E F GH I J K L MNO
1 2 3
R
GEN II AI REM
155
75
57