Innotech Genesis V4 System - Manual (Page 110)

Installation Instructions for Innotech Genesis Systems
Edition 011100
B-1
APPENDIX B- DATA SHEETS
B-1. INTRODUCTION.
This appendix contains information in the form of the most recent data sheets for various items of
Innotech hardware and software. These data sheets are mainly intended to provide installation
information for miscellaneous ancillary units not covered elsewhere in this manual. The specific
data sheets in this appendix have been selected for inclusion based on the configuration of your
Genesis System.
Listed below is an index of the complete of line data sheets produced by Innotech. Those data
sheets selected for inclusion in this appendix are identified by a tick mark in the box to the right
of the product description.
DATA SHEET TYPE PRODUCT
Detectors
DS 1.0 General Information
DS 1.11 ITW400n Wall Mounted Detectors
DS 1.12 ITD4001 Duct Mounted Detector
DS 1.13 ITI4x0n Immersion Detectors
DS 1.14 ITW4201 Wall Mounted Detector
with Display
DS 1.15 SENWX Wall Mounted Temperature
Detectors
DS 1.16 SENDX Duct Detector
DS 1.17 SENFX Immersion Detector
DS 1.21 ITW52 Wall Mounted Temperature
Detector with Display
Controllers
DS 2.0 General Information
DS 2.01 IAP4012 Actuator Package Controller
DS 2.11 ITC4001 Temperature Controller
DS 2.12 ITC4701 Temperature Controller for
Cooling Applications
DS 2.13 ITC 4801 Temperature Controller for
Heating Applications
DS 2.21 IIC4001 4-20mA Current Loop Controller
DS 2.22 IIC4n01 4-20mA Single Term Current
Loop Controllers
DS 2.25 IVC4001 Voltage Controller
DS 2.26 IVC4n01 0-10V Single Term Voltage
Controllers
DS 2.31 IHC4001 Humidity Controller
DS 2.32 IPH40hd Package Humidity Controller