Lenze PC-based Automation Industrial PC - Manual (Page 181)

2.5 EN - 01/2012
L
181
Industrial PC | Parameter setting & configuration
Parameter reference
Industrial PC extension modules
C1096/2
C1096/3
C1096/4
C1096/5
C1096/6
C1096/7
C1096/8
Parameter | Name:
C1096/2 | ECAT: Slave manufacturer ID
Data type: UNSIGNED_32
Index: 23479.2
d
=
0x5BB7.0x02
h
Identification number of the slave manufacturer (e.g. 0x0000003B for Lenze)
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1096/3 | ECAT: Product code
Data type: UNSIGNED_32
Index: 23479.3
d
=
0x5BB7.0x03
h
Product code of the slave
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1096/4 | ECAT: Revision number
Data type: UNSIGNED_32
Index: 23479.4
d
=
0x5BB7.0x04
h
Revision number of the slave
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1096/5 | ECAT: Serial number
Data type: UNSIGNED_32
Index: 23479.5
d
=
0x5BB7.0x05
h
Serial number of the slave
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1096/6 | ECAT: Slave device name
Data type: VISIBLE_STRING
Index: 23479.6
d
=
0x5BB7.0x06
h
Device name of the slave
The name is saved to the master configuration file.
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1096/7 | ECAT: Auto increment address
Data type: INTEGER_32
Index: 23479.7
d
=
0x5BB7.0x07
h
The auto increment address is defined by the position of the slaves. The first node is assigned address "0". The
addresses are assigned consistently in descending order: 0, -1, -2 ...
Display range
(min. value | unit | max. value)
-65536 0
; Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C1096/8 | ECAT: Physical address
Data type: UNSIGNED_16
Index: 23479.8
d
=
0x5BB7.0x08
h
Physical address of the slave
The addresses are assigned consistently in ascending order, starting with 1001.
Display range
(min. value | unit | max. value)
0 65536
; Read access Write access CINH PLC STOP No transfer