Industrial pc | parameter setting & configuration – Lenze PC-based Automation Industrial PC User Manual
Page 48
Advertising
Industrial PC | Parameter setting & configuration
Web-based parameterisation with »WebConfig«
Start of the web-based parameterisation
48
L
2.5 EN - 01/2012
Double-click the WebConfig icon:
.
1. Enter <User name:password> in the Enter Network Password dialog box . As standard
setting admin:admin is preselected. Every registered user can log in.
2. Confirm with OK .
3. Afterwards the user interface of the web-based parameterisation appears.
Advertising